Zaloguj się aby zobaczyć cenę !
High working culture and high efficiency, infinitely adjustable pressure. You can set the desired pressure and only open the valve. An unquestionable advantage of the PI-PUMP 4000 is the exceptionally high flow rate, especially useful for quick work on vertical and horizontal insulation. The pump is ready for injection.
Clean all tools and objects with PI-CLEANER A after each extended break. Ensure that there is good ventilation when cleaning. Read the technical data sheets of the pump and cleaning agent used. After rinsing, use PI-SAVER for maintenance and to protect the pressure gauge:
If you want the pressure gauge to work after the injection is finished, use PI-SAVER oil:
a) pour the oil into the pump so that you can create the maximum pump pressure, with the valve closed – remember most injection pumps should not go without fluid. The PI-SAVER should reach into the “Bourdon” spring tube space and stay there throughout the injection – if left there the injectate will harden and the pressure gauge will stop working, or stop at “some pressure”.
b) You also have a chance to check if the pump is working properly
c) Drain the oil
For proper pump operation, regular oil changes are recommended to ensure optimum lubrication levels are maintained
First change after 100 h of pump operation
Each subsequent change after 200 hours of operation.
The pump is recommended to use special oil PI-PUMP OIL 4000
The pump has two tank variants:
6 l – set with ball valve
2 l – set with an injection gun
Smaller capacity of the tank means smaller amount of resin, thus lower viscosity of the injected resin and longer processing time (resulting from constant pouring of “fresh” resin). The lockable container limits the access of dirt and moisture to the pump.