Spiral anchor Ø 4,5 mm

HS-4,5

  • Anchor diameter: 4.5 mm
  • Sectional area [mm²]: 7.8
  • Yield strength [MPa]: 713.0
  • Tensile strength [MPa]: 862.1
  • Modulus – E [GPa]: 179.9

Zaloguj się aby zobaczyć cenę !

Clear

Description

TECHNICAL PARAMETERS:

  • Anchor diameter: 6 mm
  • Sectional area [mm²]: 7.8
  • Yield strength [MPa]: 713.0
  • Tensile strength [MPa]: 862.1
  • Modulus – E [GPa]: 179.9

    APPLICATION:

  • repairing cracks in structural walls made of brick, stone concrete

  • reinforcing of joints between partition walls and structural walls

  • reinforcement of roof attics

  • reinforcement of balcony plates

  • repairing and strengthening lintels, beams, ceilings

  • anchoring of separating wall sheathing layers

  • stabilization of buckling walls

  • reinforcing walls in modern buildings

ADVANTAGES OF SPIRAL REINFORCEMENT:

  • Increase the load bearing capacity of walls, columns, girders, beams, slabs, foundations
  • Fast application – no process interruptions
  • Low invasiveness – application without mess and fuss
  • Cracks do not reappear – high efficiency of the technology
  • Low cost

Please refer to the table below for the dimensions of the groove for the spiral anchors, together with the approximate mortar consumption for the anchors:

min. total anchor length (brick / stone / mixed masonry) – 1000 mm

min. total anchor length (concrete) – 600 mm

We cut the anchors to the specified dimensions on request.

For more design suggestions, please refer to the Hammpack Spiral Hammer technical documentation.

Additional information

Length

, ,